I tried to connect the egg to the WiFi, but it displays the error “Unable to connect to MQTT server” and I don’t know what to do. Any solution?
±-----------------------------------+
| Welcome to Air Quality Egg 2.0 |
| Particulate Sensor Suite |
| Firmware Version 2.2.2 |
±-----------------------------------+
Compiled on: Oct 26 2017 15:32:57
Egg Serial Number: egg0080301997080120
Info: Tiny Watchdog Initialization…OK.
Info: Slot Select Pins Initialization…OK.
Info: SPI Flash Initialization…OK.
Info: SD Card Initialization…Fail.
Info: Current firmware signature: 330343 7610
Info: SHT25 Initialization…OK.
Info: BMP280 Initialization…Fail.
Info: RTC Initialization…Fail.
Info: ESP8266 Initialization…OK.
Enter ‘aqe’ for CONFIG mode.
OPERATIONAL mode automatically begins after 12 secs of no input.
11…10…9…8…7…6…5…4…3…2…1…0…
-~=* In OPERATIONAL Mode *=~-
Info: Beginning Network Scan…
Info: Network Scan found 23 networks
Info: Access Point “Censores”, Not Found.
Info: Attempting to connect anyway.
Info: Connecting to Access Point with SSID “Censores”…OK.
Info: Request DHCP…OK.
Info: IP Addr: 172.22.125.53
Info: Netmask: 255.255.252.0
Info: Gateway: 172.22.127.254
Info: Mirrored configuration already matches current configuration.
Info: Resolved “update.wickeddevice.com” to IP address 45.55.159.249
Info: -------------------------------------
Info: Integrity Checks:
Info: File Size: 330343
Info: CRC16 Checksum: 7610
Info: Download Complete
Info: Total Bytes: 495
Info: File Size: 11
Info: Checksum: 36125
Info: Duration: 5633
Info: Signature matches, skipping HEX download.
Info: Current ESP8266 Firmware Version is 1060200
Info: ESP8266 Firmware Version is up to date
Info: Resolved “mqtt.wickeddevice.com” to IP address 104.236.234.98
Info: Connecting to MQTT Broker with Client ID “egg0080301997080120” using Authentication…Failed.
Error: Unable to connect to MQTT server
Info: Attempting Watchdog Forced Restart.