Hi,
All was working fine but now the egg won't connect and failing at obtaining an IP address from the DHCP server. I have set a static IP address as well but the egg can't then resolve the opensensors.io web address. The output I get from the egg (through USB) is as follows when in static IP mode:
-~=* In OPERATIONAL Mode *=~-
Info: Beginning Network Scan...
Info: Network Scan found 4 networks
Info: Found Access Point "scoobydo_EXT", RSSI = 83
Info: Connecting to Access Point with SSID "scoobydo_EXT"...OK.
Info: IP Addr: 192.168.1.60
Info: Netmask: 255.255.255.0
Info: Gateway: 192.168.1.1
Info: DHCPsrv: 0.0.0.0
Info: DNSserv: 192.168.1.1
Info: Erasing mirrored config...OK.
Info: Writing mirrored config...OK.
Error: Couldn't resolve 'update.wickeddevice.com'
Error: Couldn't resolve 'opensensors.io'
Error: Unable to connect to MQTT server
+------------------------------------+
| Welcome to Air Quality Egg 2.0 |
| NO2 / CO Sensor Suite |
| Firmware Version 2.0.4 |
+------------------------------------+
Compiled on: Aug 24 2015 12:47:06
Egg Serial Number: egg008028a9f1180110
Info: Tiny Watchdog Initialization...OK.
Info: Slot Select Pins Initialization...OK.
Info: SPI Flash Initialization...OK.
Info: SD Card Initialization...Fail.
Info: Current firmware signature: 346044 18705
Info: SHT25 Initialization...OK.
Info: NO2 Sensor AFE Initialization...OK.
Info: NO2 Sensor ADC Initialization...OK.
Info: CO Sensor AFE Initialization...OK.
Info: CO Sensor ADC Initialization...OK.
Info: RTC Initialization...Fail.
Info: CC3000 Initialization...OK.
Enter 'aqe' for CONFIG mode.
OPERATIONAL mode automatically begins after 12 secs of no input.
11...10...9...8...7...6...5...4...3...2...1...0...
-~=* In OPERATIONAL Mode *=~-
Info: Beginning Network Scan...
Info: Network Scan found 6 networks
Info: Found Access Point "scoobydo_EXT", RSSI = 83
Info: Connecting to Access Point with SSID "scoobydo_EXT"...OK.
Info: IP Addr: 192.168.1.60
Info: Netmask: 255.255.255.0
Info: Gateway: 192.168.1.1
Info: DHCPsrv: 0.0.0.0
Info: DNSserv: 192.168.1.1
Info: Mirrored configuration already matches current configuration.
Error: Couldn't resolve 'update.wickeddevice.com'
Error: Couldn't resolve 'opensensors.io'
Error: Unable to connect to MQTT server
+------------------------------------+
| Welcome to Air Quality Egg 2.0 |
| NO2 / CO Sensor Suite |
| Firmware Version 2.0.4 |
+------------------------------------+
Compiled on: Aug 24 2015 12:47:06
Egg Serial Number: egg008028a9f1180110
Info: Tiny Watchdog Initialization...OK.
Info: Slot Select Pins Initialization...OK.
Info: SPI Flash Initialization...OK.
Info: SD Card Initialization...Fail.
Info: Current firmware signature: 346044 18705
Info: SHT25 Initialization...OK.
Info: NO2 Sensor AFE Initialization...OK.
Info: NO2 Sensor ADC Initialization...OK.
Info: CO Sensor AFE Initialization...OK.
Info: CO Sensor ADC Initialization...OK.
Info: RTC Initialization...Fail.
Info: CC3000 Initialization...OK.
Enter 'aqe' for CONFIG mode.
It then loops indefinitely.
When I attempt to use DHCP, I get the following output. It fails to gain an IP address from the DHCP server (which is on). Since it fails, it then restores the last valid configuration and then tries to use a static IP:
-~=* In OPERATIONAL Mode *=~-
Info: Beginning Network Scan...
Info: Network Scan found 7 networks
Info: Found Access Point "scoobydo_EXT", RSSI = 83
Info: Connecting to Access Point with SSID "scoobydo_EXT"...OK.
Info: Request DHCP...Error: Failed to acquire IP address via DHCP. Rebooting.
+------------------------------------+
| Welcome to Air Quality Egg 2.0 |
| NO2 / CO Sensor Suite |
| Firmware Version 2.0.4 |
+------------------------------------+
Compiled on: Aug 24 2015 12:47:06
Egg Serial Number: egg008028a9f1180110
Info: Tiny Watchdog Initialization...OK.
Info: Slot Select Pins Initialization...OK.
Info: SPI Flash Initialization...OK.
Info: SD Card Initialization...Fail.
Info: Current firmware signature: 346044 18705
Info: SHT25 Initialization...OK.
Info: NO2 Sensor AFE Initialization...OK.
Info: NO2 Sensor ADC Initialization...OK.
Info: CO Sensor AFE Initialization...OK.
Info: CO Sensor ADC Initialization...OK.
Info: RTC Initialization...Fail.
Info: CC3000 Initialization...OK.
Info: Startup config integrity check passed, but mirrored config differs, attempting to restore from mirrored configuration.
Info: Successfully restored to last valid configuration.
Enter 'aqe' for CONFIG mode.
OPERATIONAL mode automatically begins after 12 secs of no input.
11...10...9...8...7...6...5...4...3...2...1...0...
-~=* In OPERATIONAL Mode *=~-
Info: Beginning Network Scan...
Info: Network Scan found 8 networks
Info: Found Access Point "scoobydo_EXT", RSSI = 83
Info: Connecting to Access Point with SSID "scoobydo_EXT"...OK.
Error: Unable to retrieve the IP Address!
Info: Mirrored configuration already matches current configuration.
Error: Couldn't resolve 'update.wickeddevice.com'
Error: Couldn't resolve 'opensensors.io'
Error: Unable to connect to MQTT server
+------------------------------------+
| Welcome to Air Quality Egg 2.0 |
| NO2 / CO Sensor Suite |
| Firmware Version 2.0.4 |
+------------------------------------+
Compiled on: Aug 24 2015 12:47:06
Egg Serial Number: egg008028a9f1180110
Info: Tiny Watchdog Initialization...OK.
Info: Slot Select Pins Initialization...OK.
Info: SPI Flash Initialization...OK.
Info: SD Card Initialization...Fail.
Info: Current firmware signature: 346044 18705
Info: SHT25 Initialization...OK.
Info: NO2 Sensor AFE Initialization...OK.
Info: NO2 Sensor ADC Initialization...OK.
Info: CO Sensor AFE Initialization...OK.
Info: CO Sensor ADC Initialization...OK.
Info: RTC Initialization...Fail.
Info: CC3000 Initialization...OK.
Enter 'aqe' for CONFIG mode.
OPERATIONAL mode automatically begins after 12 secs of no input.
11...10...9...8...7...6...5...4...3...2...1...0...
-~=* In OPERATIONAL Mode *=~-
Any ideas welcome.
Thanks Robbie