Clik here to view.
Motor shield question
vicatcu: WickedMotorShield Hm... I think you should be able to do it from your sketch, but you might need to add an include to the top of your sketch. Try adding:#include "WickedMotorShield.h"...
View ArticleLast screws for Angular Clock assembly
I have put the angular clock together but I am having trouble understanding how to put in the last two screws. What holds them in the plastic? Which screws do I use??? How do I do this?
View ArticleMotor shield question
I had to go and edit the library file because it would not allow me to change static/protected assignment in the sketch. One more related question: Currently I am using all 4 dc motor outputs (with...
View ArticleClik here to view.
Motor shield question
@hbilhan No problem! The servo headers are located to the left of J1 - J5, and are labelled according to their corresponding Motor assignment (M1 - M6) (pictured below). Pasted image1301x744 52.9 KB...
View ArticleMotor shield question
Thanks again. Probably least head-ache will be if I buy an independent servo board that connects to uno through i2c and run the servos that way. Also the original problem improved after I changed...
View ArticleWicked Node and Receiver Problem
I have a Node and Receiver shield that I am connecting to an an Arduino Uno. I have connected a TMP36 temp senor to pad 1 on the node and am trying to read it, but the value that the Uno is picking up...
View ArticleWicked Node and Receiver Problem
The values received from the Wicked Node are 8-bit Analog-to-Digital conversions, so to convert them to voltages you need to use the formula (5.0 * value / 256). Direct measurement with the Uno is...
View ArticleWicked Node and Receiver Problem
Ok. Thank you. I thought it may be something like that, but I could not find the info I was looking for. Thanks again.
View ArticleFind data on Internet
Hi there, After a few months of not using my AQE, I started using it again a few days ago. I can see the Egg connect to the internet but there is no data shown on...
View ArticleFind data on Internet
Hi @JoostWesseling, we're in a slight amount of disarray with respect to Xively (see this blog post), and airqualityegg.com is pretty tightly coupled to Xively at the moment. Your data is still...
View ArticleFind data on Internet
Hi Victor, Thanks for the information. Where can I see the actual measurements?Thanks, Joost Wesseling.
View ArticleFind data on Internet
What do you mean by the actual measurements? If you use the Download Tool you will get the raw voltage measurements as part of the CSV data. If you are talking about just seeing graphs of the data,...
View ArticleAQEv2 crash loop: unable to connect to MQTT server ... Authentication failed
Hi, I received my AQE v2 (particulate model) last week. It was posting data until yesterday I in the console log I found that it resolved mqtt.opensensors.io to 52.17.174.96 previous days and could...
View ArticleAQEv2 crash loop: unable to connect to MQTT server ... Authentication failed
@Zan it sounds like maybe your device's OpenSensors MQTT password got reset. I can see that the device has been "claimed" in OpenSensors, so perhaps you accidentally hit the Reset Password button...
View ArticleAQEv2 crash loop: unable to connect to MQTT server ... Authentication failed
Thanks for your reply! Its very clear, but.... Indeed the device was claimed, and the password reset. Worse is that the claimed device was the deleted later on from my opensensor account, in attempts...
View ArticleAQEv2 crash loop: unable to connect to MQTT server ... Authentication failed
Hey @Zan, OK we can recover (I'm pretty sure). Lets take it one step at a time. I've re-created the Egg in OpenSensors now, and while I work out some details with the folks at OpenSensors.io I would...
View ArticleAQEv2 crash loop: unable to connect to MQTT server ... Authentication failed
Hi Vicatcu, correct - I have not followed steps 6 to 10 now (after my device was deleted from my account I could not even reset it if I wanted too). But the reset button might have been hit before -...
View ArticleAQEv2 crash loop: unable to connect to MQTT server ... Authentication failed
Zan, I just tested connecting using the password we have on record here, I'll email you with instructions to ensure it's entered into the Egg correctly.
View ArticleAQEv2 crash loop: unable to connect to MQTT server ... Authentication failed
OK, I just sent you a new ticket with instructions on what to punch in
View ArticleAQEv2 crash loop: unable to connect to MQTT server ... Authentication failed
Hi @Zan I just want to check back to make the stuff I sent you by email worked out alright. Let me know. For posterity, the generic content of my instructions was: Get yourself to the "AQE>: "...
View Article