MQTT connect failed
Hi victor. Offline is not a good option for me..project requires device to run continuously and publish to server. Can you direct me towards instructions for reflashing? I just reflashed to 2.0.6...
View ArticleMQTT connect failed
@eiliscoleman While it's not impossible that updating the firmware to the 2.0.8 software baseline could show an improvement, the 2.1.x hardware is fundamentally better. For that reason, I think you'll...
View ArticleClik here to view.
Air Quality Egg - Failed to Publish Heartbeat
I've got an egg that returns the error "failed to publish Heartbeat" Similar posts make it look like the S/N was not registered? Error log with S/N below: heartbeat_error.png758x154 7.19 KB Thanks!
View ArticleMQTT connect failed
I got an email from support but I'm confused as to how new wireless technology will enable connection to Mqtt ? Three out of four device s connect to wireless network so in case of those egg, how will...
View ArticleMQTT connect failed
@eiliscoleman while we have them we'll also put them through our latest calibration process, which includes a temperature characterization process. That process was not available back when we were...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
Hi @NT1 I don't think that has anything to do with registration since it looks like it connected to the MQTT broker just fine based on your excerpt. If you let it keep running for a while, does it...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
So I just allowed it to run, see excerpt below: Info: Signature matches, skipping HEX download.Info: Resolved "mqtt.opensensors.io" to IP address 52.209.152.90Info: Connecting to MQTT Broker with...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
@NT1 That's a new one for me... can you do me a favor and type: aqe restore defaults ssid your-ssid pwd your-network-password Then reset your Egg and see if it behaves any differently? Is your network...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
Hmm... See below for latest error log, returns same result after resetting egg. My network is a WiFi hotspot card, but I've got 3 other eggs all currently working fine and logging data using the same...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
@NT1 could it possibly be some kind of limitation of your Hot Spot card? Does it do the same thing if it's the only Egg connected to the Hot Spot? The next thing I'm thinking of having you try is...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
I'll see what I can dig up on the hotspot. I want to say that it's not the hotspot because the other eggs work, and the problem egg doesn't work when it's the only egg on the hotspot. But I won't rule...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
RSSI of -46 is really good (it's in units of dBm, so closer to zero is better)... so it's not that... The instructions go something like this:1. Follow the instructions through step 8 here:...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
I'm getting a long list of errors when compiling the sketch. Getting similar errors when compiling the other AQEV2FW sketches. Will keep working at it. AQEV2FW_PM_ESP:3098: error: 'tmElements_t' was...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
@NT1 Have you selected from the Tools => Boards menu "WildFirev3 [dual-optiboot]." and did you download Arduino from arduino.cc/software?
View ArticleAir Quality Egg - Failed to Publish Heartbeat
Yes, downloaded/installed Arduino 1.6.12 from arduino.cc/software, selected WildFirev3 [dual-optiboot] in boards manager.
View ArticleCurrent draw of eggs?
I'm trying to power eggs using a USB hub that also needs to power some other instruments. Can you let me know what the max current draw of an Egg is? I can't seem to find in the specs.
View ArticleAir Quality Egg - Failed to Publish Heartbeat
Could a network security setting be affecting my PC's ability to compile the AQE boards? I'm able to install the Air Quality Egg 2.1.8 boards, but when I go to compile I get a list of errors....
View ArticleCurrent draw of eggs?
@eiliscoleman it depends on the model / sensors in play, and what mode you're operating in (offline or online), but a conservative ballpark figure is about 250mA @ 5V in Wi-Fi mode.
View ArticleAir Quality Egg - Failed to Publish Heartbeat
@NT1 I just tried this from a clean slate Arduino environment and didn't encounter a problem. Did you select Tools => Boards => WildFire v3 [dual-optiboot] in the IDE before trying to compile...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
@NT1 I have a new theory about your PM Egg's behavior, lets not worry about reloading software for the moment. Have you issued the command 'restore defaults' at some point? If not please do: restore...
View Article