Air Quality Egg - Failed to Publish Heartbeat
I performed the above, sampling intervals are per below: Sensor Sampling Interval: 5 secondsSensor Averaging Interval: 60 secondsSensor Reporting Interval: 60 seconds I tried compiling the sketch on a...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
@NT1 I wonder if it's a new issue with Arduino 1.6.12, as I'm still using 1.6.9. At any rate can you let it run for like 30 minutes and send me the serial logs. The PM Egg has a different behavioral...
View ArticleClik here to view.
Air Quality Egg - Failed to Publish Heartbeat
Thanks @NT1, unfortunately that didn't shed any light on it for me . So I just build a special OTA update just for you, so we can try and reprogram your Egg over Wi-Fi. Just go into config mode and...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
Hmm, no luck unfortunately. I was able to update using your instructions but the egg is still failing to publish heartbeat.
View ArticleCurrent draw of eggs?
What about offline mode (writing on sd card) for both PM and NO2/CO eggs? We tried one NO2/CO egg with a biker using mobile power bank as power source and thought readings were lower than expected, so...
View ArticleCurrent draw of eggs?
@AbedKhooli Offline mode is about half the power demand of Wi-Fi mode so about 120mA would be a conservative estimate. As far as we know currently, there should be no significant difference between...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
OK @NT1, that's unfortunate, and thanks for indulging me with the troubleshooting. Lets get the ball rolling on an RMA then. Please send an email to support at wicked device dot com referencing this...
View ArticleCurrent draw of eggs?
Great to know. If anyone on this forum tried AQEs in a mobile situation (as opposite to fixed location) and has other operation tips (like warm up period, which we confirm is required as most of our...
View ArticleAir Quality Egg - Failed to Publish Heartbeat
Thanks, I went ahead and sent in an email, let me know if I need to resend.
View ArticleUnable to connect to MQTT server
HI Vic et al I've just deleted an old egg that I'd set up on opensensors thinking I could re-set it up myself.....but I think it's caused some problems! I've restored it to default and reconnected it...
View ArticleUnable to connect to MQTT server
I think I've sorted this. I;'ve re-registered the device The ID is now 5374 and not egg0080228b5d080140 but I can cope with thatI'm guessing that the initial allocation of an id using something like...
View ArticleAirquality Egg v 2.0 Offline Mode - Showing Readings on Display
Is there a command to replace the default display message "Logging data to SD card" with the actual readings in offline mode? I found a related thread on GG...
View ArticleAirquality Egg v 2.0 Offline Mode - Showing Readings on Display
@AbedKhooli there's not such a command presently, and I have clearly been remiss about implementing it. I still plan to, I literally just haven't gotten around to doing it. Technically I haven't...
View ArticleUnable to connect to MQTT server
@mking007 glad you got it sorted out. Ya, the Egg is super flexible and you can connect it to any MQTT server, not just OpenSensors. TL;DR: While you are free to change the settings, please be aware...
View ArticleAirquality Egg v 2.0 Offline Mode - Showing Readings on Display
So, in plain English, does this mean that such functionality won't be available before the end of this year?In offline operation, users usually don't have serial connection and the display becomes...
View ArticleAirquality Egg v 2.0 Offline Mode - Showing Readings on Display
@AbedKhooli, I agree with you that the feature is important. I think I can incorporate it before the end of the year. I'll keep you posted here.
View ArticleAQE v2 offline SD card
I have a question re. the offline data logging package. Do you know how many days / hours it takes to fill up the SD card if the sampling is left at the default rates? What does the software do if the...
View ArticleAQE v2 offline SD card
Hi @mking007, we install 4GB SD cards. If we coarsely approximate that a CSV record is 96 bytes (it's actually less I think), then that is room for 2^32 / (3x2^5)= 2^27/3, or over 44 million records....
View ArticleClik here to view.